PTP 650 with built-in antenna. It has all the high-performance features consisting of Fast Adaptive Modulation, near and Non-Line Sight connectivity, layer 2 bridge implementation, symmetric and asymmetric TDD operation, and two Gigabit Ethernet ports.

 

 

RF BANDS

Wide-band operation 4.9 to 6.05 GHz (allowable frequencies and bands are dictated by individual country regulations. The most common bands are listed here.) 4.940 – 4.990 GHz (Public safety) 5.15 – 5.25 GHz 5.25 – 5.35 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz 5.825 – 6.050 GHz

CHANNEL SIZES

5 / 10 / 15 / 20 / 30 MHz channels Channel sizes depend on individual country regulations

SPECTRAL EFFICIENCY

10 bps/Hz maximum

CHANNEL SELECTION

By dynamic spectrum optimization or fixed frequency assignment; automatic selection on start-up and continual self-optimization to avoid interference

MAXIMUM TRANSMIT POWER

Up to 27 dbm at BPSK; up to 23 dBm at 256 QAM

SYSTEM GAIN

Integrated: up to 160 dB with 20 MHz channel and integrated 19 dBi antenna; varies with modulation mode, channel size and spectrum

RECEIVER SENSITIVITY

-98 dBm with 5 MHz channel

MODULATION / ERROR CORRECTION

Fast Preemptive Adaptive Modulation featuring 13 modulation / FEC coding levels ranging from BPSK to 256 QAM dual payload MIMO

DUPLEX SCHEME

Synchronized Time Division Duplex (TDD) and Half Duplex Frequency Division Duplex (HD-FDD); dynamic or fixed transmit/receive ratio; each TDD-synchronized link requires a Cambium TDD-SYNC synchronization unit5 to provide an accurate timing reference signal

ANTENNA

Integrated flat panel: – 19 dBi

RANGE

250 km (155 miles)

SECURITY

FIPS-197 compliant 128-bit or 256-bit AES encryption (optional) HTTPs and SNMPv3 Identity-based user accounts Configurable password rules User authentication and RADIUS support Event logging and management; optional logging via syslog

Reviews

There are no reviews yet.

Be the first to review “PTP 650 Integrated”

Your email address will not be published. Required fields are marked *